曙海教育集团
全国报名免费热线:4008699035 微信:shuhaipeixun
或15921673576(微信同号) QQ:1299983702
首页 课程表 在线聊 报名 讲师 品牌 QQ聊 活动 就业
 
Cadence PCB Librarian Expert 库文件管理和制作 培训

 
  班级规模及环境--热线:4008699035 手机:15921673576( 微信同号)
      每个班级的人数限3到5人,互动授课, 保障效果,小班授课。
  上间和地点
上部份地点:【上海】同济大学(沪西)/新城金郡商务楼(11号线白银路站)【深圳分部】:电影大厦(地铁一号线大剧院站)/深圳大学成教院【北京分部】:北京中山学院/福鑫大楼【南京分部】:金港大厦(和燕路)【武汉分部】:佳源大厦(高新二路)【成都分部】:领馆区1号(中和大道)【沈阳分部】:沈阳理工大学/六宅臻品【郑州分部】:郑州大学/锦华大厦【石家庄分部】:河北科技大学/瑞景大厦
最近开间(周末班/连续班/晚班):2019年1月26日
  实验设备
    ◆小班教学,教学效果好
       
       ☆注重质量☆边讲边练

       ☆合格学员免费推荐工作
       ★实验设备请点击这儿查看★
  质量保障

       1、培训过程中,如有部分内容理解不透或消化不好,可免费在以后培训班中重听;
       2、课程完成后,授课老师留给学员手机和Email,保障培训效果,免费提供半年的技术支持。
       3、培训合格学员可享受免费推荐就业机会。☆合格学员免费颁发相关工程师等资格证书,提升职业资质。专注高端技术培训15年,曙海学员的能力得到大家的认同,受到用人单位的广泛赞誉,曙海的证书受到广泛认可。

部份程大纲
 

Lesson 1: Introduction
In this lesson, we will examine the relationship between design processes, tools, and library models; introduce the Library Management flow and the part creation tools; and discuss library structure.

Lesson 2: Setting Up a Build Area
In this lesson, we will Suggest a directory structure for building and testing parts.

Lesson 3: The Symbol View
In this lesson, we will define the schematic symbol graphics and properties.

Lesson 4: The Chips View
In this lesson, we will learn to define available package styles and logical-to- physical pin mapping. We will also show you how to specify the Allegro footprint.

Lesson 5: The Part Table View
In this lesson, We will show you how to use the part table view to customize part properties.

Lesson 6: The Simulation View
In this lesson, We will show you how to associate the part to a simulation model.

Lesson 7: Testing the Part
In this lesson, We will learn to use the new part in a simulated design flow.

Lesson 8: Building a 74LCX373
In this lesson, we will give a example about building a 74LCX373. we will Set up Part Developer for 100-mil pin centers, and create a single-section vectored pin part.

Lesson 9: Building a 74LCX125
In this lesson, we will give a example about building a 74LCX125. Here we will show you how to Create a multi-section part and how to use Concept to modify symbol graphics.

Lesson 10: Building a Resistor Network
In this lesson, we will build a part with both single- and multi-section versions with pin swapping capability. We will also use pin types that disable IO and load checking.

Lesson 11: More Part Building
In this lesson, we will: Create a new part from an existing one, Show Power and Ground pins on the symbol, Define NC pins, and Create a voltage symbol.

Lesson 12: Advanced Skills
In this lesson, we will: Create an asymmetrical part, Create a split part, Import text files, Perform part modifications and discuss revision controls, and Introduce library category files.

Lesson 13:Pad Designer
In this lesson, we will show you how to create Allegro padstacks.

Lesson 14: Package Symbols
In this lesson, we will create package symbols, and create a thermal relief flash symbol.

Lesson 15: Package Wizard
In this lesson, we will show you how to use the Package Symbol Wizard to create Allegro PCB package

Lesson 16: Custom Padstacks
In this lesson, we will: Create a shape symbol, Use the shape symbol in a custom padstack, Use the custom padstack in a package symbol.

Lesson 17: Mechanical Symbols
In this lesson, we will show you how to create a board outline symbol.

Lesson 18: Edge Connector
In this lesson, we will show you how to create padstacks for an edge connector, and how to create an edge connector package symbol.

Appendix A: Concept DSP Example
The DSP device that is used as an example is the Texas Instruments TMS320C6211B. In looking at the TMS320C611B, it was decided to create a split part with three sections. The first two sections will have signal pins, and the third section will have the Power and Ground pins. It was also decided that the default position for power and ground pins would be changed so that the power pins would appear on the left side of the symbol and the ground pins would appear on the right side.

Appendix B: Allegro BGA Example
This appendix will give an example of creating a BGA footprint that is used by Texas Instruments with their TMS320C6211B device. This footprint pattern will have pin escape vias built into the symbol. Below is the relevant screen capture of the mechanical data from the TI datasheet, as well as an example of the finished Allegro package symbol.

 

-

 

  备案号:沪ICP备08026168号 .(2014年7月11)..............